DN40, 150#, SS, FB, Trunnion Mounted Ball

Trunnion Mounted Ball valves are straight-through flow valves which provide positive shut-off with minimal pressure drop and flow turbulence. The barrier to flow is a ball which is rotated 90 degrees to the direction of flow.

In Trunnion Mounted valves, the ball is held in a fixed axial position by upper and lower stems (trunnions) and can move only in a rotational mode. The resilient seats are contained in metal carriers which are spring loaded against the ball. Hoe ever metal seats normally tungsten carbide coated can also be used. Line pressure applied to a close valve increases the spring load on the upstream seat to effect a tight seal. The primary seating is therefore on the upstream seat permitting trunnion mounted ball valves to be used for “block and bleed” service.

  • Valve Type: Ball
  • Subtype: Trunnion Mounted
  • Valve Size: 40(mm), 1.5(inch)
  • Bore: FB
  • Class Rating: 150
  • Body Material: Stainless Steel
  • End Connection: RF
Qty

Trunnion Mounted Ball valves are straight-through flow valves which provide... More information

Results

  • Valve Type: Ball
  • Subtype: Trunnion Mounted
  • Valve Size: 150(mm), 6(inch)
  • Bore: FB
  • Class Rating: 150
  • Body Material: Low Temperature Carbon Steel
  • End Connection: RF
Qty

Trunnion Mounted Ball valves are straight-through flow valves which provide... More information

  • Valve Type: Gate
  • Subtype: Solid Wedge
  • Valve Size: 40(mm), 1.5(inch)
  • Class Rating: 150
  • Body Material: Carbon Steel
  • API Trim Number: Trim 8
  • End Connection: RF
Qty

The solid wedge gate valve, uses two inclined seats and... More information

  • Valve Type: Gate
  • Subtype: Solid Wedge
  • Valve Size: 25(mm), 1(inch)
  • Class Rating: 1500
  • Body Material: Carbon Steel
  • API Trim Number: Trim 5
  • End Connection: RF
Qty

The solid wedge gate valve, uses two inclined seats and... More information

  • Valve Type: Gate
  • Subtype: Solid Wedge
  • Valve Size: 25(mm), 1(inch)
  • Class Rating: 1500
  • Body Material: Carbon Steel
  • API Trim Number: Trim 5
  • End Connection: RTJ
Qty

The solid wedge gate valve, uses two inclined seats and... More information

  • Valve Type: Gate
  • Subtype: Solid Wedge
  • Valve Size: 20(mm), 0.75(inch)
  • Class Rating: 800
  • Body Material: Carbon Steel
  • API Trim Number: Trim 8
  • End Connection: NPT
Qty

The solid wedge gate valve, uses two inclined seats and... More information

View Drawing
  • Valve Type: Gate
  • Subtype: Solid Wedge
  • Valve Size: 25(mm), 1(inch)
  • Class Rating: 800
  • Body Material: Carbon Steel
  • API Trim Number: Trim 8
  • End Connection: SW
Qty

The solid wedge gate valve, uses two inclined seats and... More information

View Drawing
  • Valve Type: Gate
  • Subtype: Solid Wedge
  • Valve Size: 25(mm), 1(inch)
  • Class Rating: 150
  • Body Material: Carbon Steel
  • API Trim Number: Trim 8
  • End Connection: RF
Qty

The solid wedge gate valve, uses two inclined seats and... More information

  • Valve Type: Gate
  • Subtype: Solid Wedge
  • Valve Size: 40(mm), 1.5(inch)
  • Class Rating: 800
  • Body Material: Low Temperature Carbon Steel
  • API Trim Number: Trim 16
  • End Connection: SW / NPT
Qty

The solid wedge gate valve, uses two inclined seats and... More information

  • Valve Type: Gate
  • Subtype: Solid Wedge
  • Valve Size: 40(mm), 1.5(inch)
  • Class Rating: 800
  • Body Material: Low Temperature Carbon Steel
  • API Trim Number: Trim 12
  • End Connection: NPT
Qty

The solid wedge gate valve, uses two inclined seats and... More information

  • Valve Type: Gate
  • Subtype: Solid Wedge
  • Valve Size: 15(mm), 0.5(inch)
  • Class Rating: 800
  • Body Material: Carbon Steel
  • API Trim Number: Trim 12
  • End Connection: SW / NPT
Qty

The solid wedge gate valve, uses two inclined seats and... More information

Valve Categories

Callidus stock several types of valves. Each of those can form an essential part of your flow control solution. Whether it is in the mining, oil & gas or water industry.

Our valves include, but are not limited to: ball valves for on/off control without pressure drop; butterfly valves for an accurate flow regulation; check valves to allow a one-way flow; gate valves for low pressure drop in on/off control; and globe valves for an optimal constant flow.

Our valves are from high-end manufacturers and on stock in a various sizes, class ratings, body material and end connections.