DN50, 300#, SS, (N/A), Swing Check

Swing check valves use a flapper or disk on a hinge in the body, as flow goes through the valve the disk moves away from the sear and allows the liquid or gas to pass. When back flow is experienced the disk moves back onto the seat and is sealed by the pressure of the medium.

  • Valve Type: Check
  • Subtype: Swing
  • Valve Size: 50(mm), 2(inch)
  • Class Rating: 300
  • Body Material: Stainless Steel
  • API Trim Number: Trim 5
  • End Connection: RF
Qty

Swing check valves use a flapper or disk on a... More information

Results

  • Valve Type: Ball
  • Subtype: Trunnion Mounted
  • Valve Size: 150(mm), 6(inch)
  • Bore: FB
  • Class Rating: 150
  • Body Material: Low Temperature Carbon Steel
  • End Connection: RF
Qty

Trunnion Mounted Ball valves are straight-through flow valves which provide... More information

  • Valve Type: Gate
  • Subtype: Solid Wedge
  • Valve Size: 40(mm), 1.5(inch)
  • Class Rating: 150
  • Body Material: Carbon Steel
  • API Trim Number: Trim 8
  • End Connection: RF
Qty

The solid wedge gate valve, uses two inclined seats and... More information

  • Valve Type: Gate
  • Subtype: Solid Wedge
  • Valve Size: 25(mm), 1(inch)
  • Class Rating: 1500
  • Body Material: Carbon Steel
  • API Trim Number: Trim 5
  • End Connection: RF
Qty

The solid wedge gate valve, uses two inclined seats and... More information

  • Valve Type: Gate
  • Subtype: Solid Wedge
  • Valve Size: 25(mm), 1(inch)
  • Class Rating: 1500
  • Body Material: Carbon Steel
  • API Trim Number: Trim 5
  • End Connection: RTJ
Qty

The solid wedge gate valve, uses two inclined seats and... More information

  • Valve Type: Gate
  • Subtype: Solid Wedge
  • Valve Size: 20(mm), 0.75(inch)
  • Class Rating: 800
  • Body Material: Carbon Steel
  • API Trim Number: Trim 8
  • End Connection: NPT
Qty

The solid wedge gate valve, uses two inclined seats and... More information

View Drawing
  • Valve Type: Gate
  • Subtype: Solid Wedge
  • Valve Size: 25(mm), 1(inch)
  • Class Rating: 800
  • Body Material: Carbon Steel
  • API Trim Number: Trim 8
  • End Connection: SW
Qty

The solid wedge gate valve, uses two inclined seats and... More information

View Drawing
  • Valve Type: Gate
  • Subtype: Solid Wedge
  • Valve Size: 25(mm), 1(inch)
  • Class Rating: 150
  • Body Material: Carbon Steel
  • API Trim Number: Trim 8
  • End Connection: RF
Qty

The solid wedge gate valve, uses two inclined seats and... More information

  • Valve Type: Gate
  • Subtype: Solid Wedge
  • Valve Size: 40(mm), 1.5(inch)
  • Class Rating: 800
  • Body Material: Low Temperature Carbon Steel
  • API Trim Number: Trim 16
  • End Connection: SW / NPT
Qty

The solid wedge gate valve, uses two inclined seats and... More information

  • Valve Type: Gate
  • Subtype: Solid Wedge
  • Valve Size: 40(mm), 1.5(inch)
  • Class Rating: 800
  • Body Material: Low Temperature Carbon Steel
  • API Trim Number: Trim 12
  • End Connection: NPT
Qty

The solid wedge gate valve, uses two inclined seats and... More information

  • Valve Type: Gate
  • Subtype: Solid Wedge
  • Valve Size: 15(mm), 0.5(inch)
  • Class Rating: 800
  • Body Material: Carbon Steel
  • API Trim Number: Trim 12
  • End Connection: SW / NPT
Qty

The solid wedge gate valve, uses two inclined seats and... More information

Valve Categories

Callidus stock several types of valves. Each of those can form an essential part of your flow control solution. Whether it is in the mining, oil & gas or water industry.

Our valves include, but are not limited to: ball valves for on/off control without pressure drop; butterfly valves for an accurate flow regulation; check valves to allow a one-way flow; gate valves for low pressure drop in on/off control; and globe valves for an optimal constant flow.

Our valves are from high-end manufacturers and on stock in a various sizes, class ratings, body material and end connections.